User Guide
Digital terrestrial Free-to-View is a non-subscription service through an existing TV and aerial. Total Channel availability is subject to coverage. You may be required to upgrade your television aerial to enable full service reception. Contact information: Nokia Support: 01793 556 046, E-mail: NHC.sales@nokia.com Nokia, Nokia Connecting People and Navi Bars are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their owners.
Mediamaster Contents Remote control Front and rear panel Connecting the Mediamaster 4 5 6 About the SCART sockets Preparing the remote control About digital transmission Connecting to the TV aerial Common connections Connecting to the TV with SCART Connecting to the TV without SCART Connecting a video recorder with SCART Connecting a video recorder without SCART First time installation 6 6 6 7 8 8 8 9 9 Navi Bars 13 Navigating with Navi Bars The Settings folder The User preferences folder TV folder E
Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. mute/ Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster into standby mode. Also press this button to switch it on. red green yellow blue Function keys for interactive applications. freeze To freeze the picture. Press the button one more time to return to normal viewing mode. subtitle To show and hide subtitles.
Front and rear panel Front panel A constant green light indicates that the Mediamaster is turned ON. A constant red light indicates standby mode. Flashes red when commands from the remote control are received. Continously flashes green during software update.
Connecting the Mediamaster The box for your Mediamaster should contain the following items: • The Mediamaster • Remote control with 2 AAA batteries • SCART cable (fully connected; 1,0 metre) • RF cable • User Guide with software license agreement ( SCART cable RF cable • Separate power supply. Remote control Power supply About the SCART socket The rear panel of the Mediamaster is equipped with a SCART socket (see picture.
Connecting the Mediamaster Connecting to the TV aerial You can connect the Mediamaster to the following type of aerials: 1. Standard outdoor aerial Where possible, use an outdoor roof aerial intended for receiving UHF channels between 21 and 69. Please note the following: • In some block of flats, the roof-mounted aerial system includes a filter and channel selector. If so, the aerial may not work with the Mediamaster. Please consult the landlord.
Connecting the Mediamaster Common connections There are many different types of TV/VCR and other equipment that you can connect to the Mediamaster. In this section you will see some of the most common ways to connect your equipment. If you have problems with your connections and need help, contact your retailer or Nokia Support. Connecting to the TV with SCART • Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the Mediamaster.
Connecting the Mediamaster Connecting a video recorder with SCART • Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the Mediamaster. • Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Video. • Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the video. • Connect an RF cable from the TV/VCR output on the video to the RF input socket on the TV.
First time installation General information Once you have correctly connected the Mediamaster, you also have to perform a “First time installation.” During this procedure, helpful information is displayed at the bottom of the menus. The ok button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be changed in a menu.
Watching TV & listening to Radio General Information You can watch digital TV and listen to digital radio with this Mediamaster. • If no TV channel is automatically shown after you have finished the installation procedure, press the P+ or P- button to select a channel. • If that does not work open the Navi Bars with the menu button. • Scroll to the TV channels folder and select a channel. (See more about Navi Bars on page 13.
Watching TV & listening to Radio Temporary settings By pressing opt you open a menu in which it is possible to enter temporary settings. Settings made in this “options menu” are only valid for the programme you are currently watching. If you leave the programme and return to it again, the temporary settings will be lost. Audio language When available, you can select among the different languages being broadcast. Subtitle language When available, you can select among different subtitle languages.
Navi Bars Navigating with Navi Bars Bookmark name Bookmark Navi Bars is used for selecting TV/Radio channels and changing settings. 1 Display Navi Bars by pressing the menu button and hide Navi bars by pressing the menu or back button . 2 When Navi Bars are displayed you can move around with the arrow keys. The horizontal row contains folders, e.g. TV, Settings and Radio. Each folder contains one or more bookmarks. • You move a folder by pressing arrow keys.
Navi Bars The Settings folder Each of the bookmarks in the Settings folder contains menus from where you can change the settings of the Mediamaster. To open some of the menus you will be asked to enter your access code. From the factory the access code is set to 1234. The settings folders can not be deleted. The User preferences folder Banner time-out When you switch channels, an information banner will be shown for a few seconds. You can select how long the banner will be shown.
Navi Bars TV folder Time adjustment The time is adjusted by using the time. buttons, ±1/2 an hour at a TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for widescreen TV. Press opt to get a TV programme in the background and you can instantly watch the result of your choice.
Navi Bars Edit lists folder The TV folder may contain lots of channels. By creating your own lists you can make channel handling more convenient. From these menus you can create and edit favourite channel lists. Select list If you have several lists and want to make changes in them, select buttons. which list by using the Create list for From here you create your own lists, containing the channels you most frequently watch. Give each list a specific name, e.g. “News” or “Kids”.
Navi Bars Delete selected list If you want to delete a list completely, first select the list with the buttons on the line “Select list”. Then step down to “Delete selected list” and delete it. Rename selected list Give the list a new name. Refer to “Create list” on the previous page. Add/Delete channels From this menu you add and remove the channels in your lists. A channel is added or removed from the list by pressing info.
Navi Bars Lock channels To get to this menu you first have to enter your access code. From the factory the access code is set to 1234. From here you can lock (and later unlock) channels in order to prevent e.g. your children from watching. • Select the channel you want to lock and press info. Repeat the procedure for each channel you want to lock. • Press opt if you want to preview the channel. • Press ok to confirm. A locked channel will be marked with a “⊗” symbol.
Navi Bars Advanced manual search You can use this menu if you are looking for some “specific” channels (i.e. non-DVB standard channels) which can be more easy to find when you have entered the necessary PID settings here. Channel: Select the channel you want to search for. PID Video: Enter the PID (Packet Identifier) for the video signal. PID Audio: Enter the PID for the audio signal. PID PCR: Enter the PID for the PCR (Programme Clock Reference). • Press ok to tune with the specified values.
Navi Bars Maintenance folder System Information When you enter the Maintenance folder you find general information about which hardware and software version your Mediamaster is running on. Reinstall Use this option only if you have to start the complete installation procedure from scratch. If you continue from here, all your previous settings, access code and favourite channels etc.
Technical specifications Transmission Standards DVB, MPEG 2, OFDM RF input Modulator output In-/output connector IEC female / IEC male RF input frequency 470-862 MHz RF input power level -78 to -30 dBm RF impedance 75 Ω Frequency range Loop through 47-862 MHz Frequency range RF modulator 471,25-855,25 MHz Output channel CH 21-69 Preset channel 43 Output signal PAL I Demodulation Supports 2k and 8k TV SCART Video output Audio output RGB output RGB bandwidth Fast blanking output Status output 1 Vpp (±1 dB)
Nokia Mediamaster software end-user license IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE NOKIA CORPORATION, NOKIA HOME COMMUNICATIONS END-USER SOFTWARE AGREEMENT This Software Agreement (“Agreement”) is between You (either an individual or an entity), the End User, and Nokia Corporation, Nokia Home Communications (“Nokia”). The Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver.
Nokia is a registered trademark of Nokia Corporation www.nokia.com 00002797.
