User Guide

ManualsBrandsNokia ManualsCell Phone1110

FPS-11 Parallel flash

prommer

FPS-11 interfaces with:

• PC

• Control unit

• Flash adapter

• Smart card

FPS-11 flash prommer features:

• Can flash up to 8 phones at a time, controlled by one PC

• Communication method between PC and FPS-11 is single USB2.0

• No need for external power for powering up phones

• Smart Card reader for SX-2 and SX-4

• Updates software

• Future feature: will support all DCT-4 protocols and models

FPS-11 sales package includes:

• FPS-11

• Power Supply for FPS-11

• EUR, UK, USA Power cords

• USB2.0 cable

FPS-8 FLASH prommer

The flash prommer FPS-8 is used for example with flash adapters,

docking station adapters and flash/docking stations. Power is supplied

to FPS-8 from the universal power supply, ACF-8.

The sales pack includes:

• FPS-8 flash prommer

• FPS-8 activation sheet

• ACF-8 universal power supply

• AXS-4 service cable (D9-D9)

• Printer cable

JBV-1 Docking station

The JBV-1 docking station is a general tool that has been designed for

calibration and software update use. The JBV-1 is used together with a

docking station adapter as one unit

In calibration mode the JBV-1 is powered by an external power supply:

11-16V DC. When flashing the power for the phone must be taken from

the flash prommer.

Note: JBV-1 main electrical functions are:

• adjustable VBATT calibration voltage, current measurement

limit voltage: VCHAR, current measurement: ICHAR

• adjustable ADC calibration voltage via BTEM and the BSI

signal

• BTEMP and BSI calibration resistor

• signal from FBUS to the phone via the parallel jig

• control via FBUS or USB

• Flash OK/FAIL indication

RH-70

Service Tools Nokia Customer Care

9243364 (Issue 1, Part 1) Company Confidential Page 4–9