User Guide

Voltage Voltage (V) Condition

HW reset demands

Min 1. 0V d

Max --

a. The nominal voltage is defined as being 15% higher than the lower extreme voltage. TA will test with this

nominal voltage at an 85% range (0.85x3.9V

3.3V).

b. This limit is set to be above SW shutdown limit in TA.

c. During fast charging of an empty battery, this voltage might exceed this value. Voltages between 4.20 and

4.60 might appear for a short while.

d. The minimum battery cell voltage required for the reset circuitry to turn on. This is not confirmed by measures

at pt.

Table 6 Current consumption

Condition Min Typical Max Unit

Call (MoU)

(E)GSM 900

GSM 1800

208

188

Idle (MoU) 2.72

Power off 150 250 mA

RH-70

General information Nokia Customer Care

9243364 (Issue 1, Part 1) Company Confidential Page 1–9