User Guide

Figure 18 Checking IHF and ring tone by using "Buzzer"

Check vibra function using "Vibra control"

Steps

1. Connect phone with Phoenix.

2. Open “Vibra control” window from “Testing -> Vibra control”, as shown in the figure below.

3. Select suitable intensity value, for example 53 %.

4. Select “Vibra state” as “Enabled”

5. Click “Write”.

6. Check if Vibra works.

Figure 19 Checking vibra function by using vibra control

RH-70

Nokia Customer Care Baseband troubleshooting

Page 1–20 Company Confidential 9243364 (Issue 1, Part 2)