Customer Care Solutions RH-12/36/38 Series Transceivers Service tools Issue 1 10/03 Nokia Corporation
RH-12/36/38 Service tools Company confidential CCS Technical Documentation [This page left intentionally blank] Page 2 Nokia Corporation.
Company confidential CCS Technical Documentation RH-12/36/ Service tools Table of Contents Page No Service Tools.................................................................................................................. 5 Custom service tools ...................................................................................................... 5 Standard service tools ..................................................................................................7 Service Cables .................
RH-12/36/38 Service tools Company confidential CCS Technical Documentation [This page left intentionally blank] Page 4 Nokia Corporation.
Company confidential CCS Technical Documentation RH-12/36/ Service tools Service Tools Custom service tools Product Service Tool Product Code DA-10 Docking Station Adapter 0770749 The Docking Station Adapter, together with a Docking Station, is used for analysis of Mbus, Fbus, RF, and audio connections. MJ-15 Module Jig 0770739 This jig allows phone PWB-level service and troubleshooting. Components must be protected against over-voltage and over-current.
RH-12/36/38 Service tools Company confidential CCS Technical Documentation Standard service tools Product Service Tool Product Code ACF-8 Universal Power Supply 0680032 ACF-8 is used to power FPS-8 and FLS-4S. ACF-8 has 6 Vdc and 2.1A output. FLS-4S POS Flash Adapter 0080543 (Americas) 0080542 (APAC) 0080541 (Europe/Africa) The Point of Sale (POS) flash is a low-cost software upgrade tool. This requires the XCS-1 cable and ACP-8U for operation.
Company confidential CCS Technical Documentation PKD-1 SW Security Device 0750018 RH-12/36/ Service tools SW security device PKD-1 is hardware device that, when connected to the parallel (LPT) port of the PC, enables the use of the service software. Without the dongle present, it is not possible to use the service software. Printers or other peripheral devices can be connected to the PC through the dongle, if needed.
RH-12/36/38 Service tools Company confidential CCS Technical Documentation Service Cables Product Service Tool Product Code DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJS-37. FLC-2 DC Cable 0730185 FLC-2 is used to supply a controlled operating voltage. PCS-1 Power Cable 0730012 The Power Cable PCS-1 is used to connect the service tools (JBV-1, MJS-57) to an external power supply.
Company confidential CCS Technical Documentation XCS-1 Service Cable 0730218 XCS-4 Modular Cable 0730178 Issue 1 10/03 RH-12/36/ Service tools The XCS-1 Service Cable is used to connect FLS-4 to FLA-23. View of XCS-4 Nokia Corporation. XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes.
RH-12/36/38 Service tools Company confidential CCS Technical Documentation [This page left intentionally blank] Page 10 Nokia Corporation.