User Guide

CCS Technical Documentation
RH-18/36/38
Issue 1 10/03 Copyright Nokia. All rights reserved.. Page 67
Typical values and limits in Rx Band Filter Response Compensation GSM1900:
Choose "Stop, write to PM area".
If the values shown are within limits, choose “Yes” to save values to the phone.
Close the “RX Band Filter Response Compensation” – dialog to end tuning.
Rx Am Suppression
RF generator is needed.
Must be done separately on each band!
Start RX Am Suppression at GSM850, then continue at GSM1800 band and finally at the
GSM1900 band.
Remember to take jig and cable attenuations into account!
Select Tuning => Rx Am Suppression
Channel
Input
Frequency (MHz)
Low limit (dB) High limit (dB)
496 1927.06771 -10 3.5
512 1930.26771 -3.5 3.5
537 1935.26771 -3.5 3.5
586 1945.06771 -3.5 3.5
661 1960.06771 -3.5 3.5
736 1975.06771 -3.5 3.5
794 1986.66771 -3.5 3.5
810 1989.86771 -3.5 3.5
835 1994.86771 -10 3.5