User guide

14
Get started
Set the time, zone, and date
When you switch on your phone for the first time, and the phone is in the standby
mode, you are asked to set the time and date. Fill in the fields, and select Save.
To access Date and time later, select Menu > Settings > Date and time > Date &
time settings, Date and time format, or Auto-update of time (network service) to
change the time, time zone, and date settings.
Configuration settings service
To use some of the network services, such as mobile internet services, MMS, Nokia
Xpress audio messaging, or remote internet server synchronisation, your phone
needs the correct configuration settings. For more information on availability,
contact your network operator, service provider, nearest authorised Nokia dealer,
or visit the support area on the Nokia website, www.nokia.com/support.
When you have received the settings as a configuration message, and the settings
are not automatically saved and activated, Configuration settings received is
displayed. Select Show > Save. If required, enter the PIN code supplied by the
service provider.
■ Antenna
Your device has an internal antenna.
Note: As with any radio transmitting device,
avoid touching an antenna unnecessarily
when the antenna is in use. For example,
avoid touching the cellular antenna during a
phone call. Contact with a transmitting or
receiving antenna affects the quality of the
radio communication, may cause the device
to operate at a higher power level than
otherwise needed, and may reduce the
battery life.