E51 User Guide Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-244 / RM-426 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/. © 2007 Nokia. All rights reserved.
Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated.
Contents For your safety ...............................................10 About your device...............................................................11 Network services................................................................11 Enhancements, batteries, and chargers...........................12 Get started......................................................13 Insert the SIM card and battery.........................................13 Charge the battery........................................
Make a call.....................................................................32 Make a conference call..................................................33 Fax calls..........................................................................33 Video calls.........................................................................33 Make a video call...........................................................33 Share a video.................................................................
Delete messages..............................................................52 Subfolders in your remote e-mail..................................52 Text messages.....................................................................52 Write and send text messages.......................................52 Sending options for text messages................................53 Text messages on the SIM card......................................53 View picture messages.................................................
Capture an image.............................................................70 Record a video clip...........................................................70 Camera settings...............................................................71 Gallery..................................................................................71 Work with media files and folders.................................71 View images.....................................................................71 Manage image files........
Pair devices.......................................................................91 Security tips......................................................................92 SIM access profile................................................................92 Wireless LAN........................................................................92 WLAN connections...........................................................93 See WLAN availability......................................................93 WLAN wizard.
WEP security settings....................................................114 WEP key settings............................................................114 802.1x security settings................................................114 WPA security settings....................................................114 Wireless LAN plugins.....................................................115 EAP plug-ins.................................................................115 Use EAP plug-ins............................
For your safety 10 Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.
these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, and e-mail require network support for these technologies.
Get started Model number: Nokia E51-1 (RM-244, with camera) and Nokia E51-2 (RM-426, without camera). Hereinafter referred to as Nokia E51. Insert the SIM card and battery For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. 1. With the back of the device facing you, press the release button (1) and slide the back cover off (2). 2.
5. Slide the back cover back to place. Charge the battery 1. Connect a compatible charger to a wall outlet. 2. 14 Connect the power cord to the device. If the battery is completely discharged, it may take a while before the charging indicator starts scrolling. 3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet. Your battery has been precharged at the factory, but the charging levels may vary.
Keys and parts 1 — Power key 2 — Earpiece 3 — Volume up key 4 — Mute key. Press the key to mute the microphone during a call. 5 — Volume down key 6 — Navi™ scroll key. Press the scroll key to enter a selection, to scroll left, right, up, and down on the display. 7 — Selection key. Press the selection key to perform the function shown above it on the display. 8 — End key. Press the end key to reject a call, end active calls and held calls, and with a long keypress, end data connections. 9 — Backspace key.
Attach the wrist strap Thread the wrist strap as shown, and tighten it. 1 — Home key 2 — Contacts key 3 — E-mail key 4 — Calendar key Connect the headset Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Connect the compatible headset to the headset connector of your device. 16 First start-up 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter the code, and select OK. 3.
You can switch the device on with no SIM card inserted, in which case the device starts up in the offline mode, and you cannot use the network-dependent phone functions. To switch the device off, press and hold the power key. Lock the keys When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. The keypad of your device locks automatically to prevent the keys from being accidentally pressed.
You have one or more unread messages in the Inbox folder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder in Messaging. You have one or more missed phone calls. The keys of the device are locked. An alarm is active. You have selected the Silent profile, and the device does not ring for an incoming call or message. Bluetooth is active. Data is being transmitted using Bluetooth connectivity.
You have an ongoing push-to-talk connection. Your push-to-talk connection is in the do not disturb mode, because the ringing type setting of your device is set to Beep once or Silent, or you have an incoming or ongoing phone call. In this mode, you cannot make PTT calls. Nokia support and contact information Check www.nokia.com/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product.
Your Nokia E51 The images in this guide may differ from your device display. Welcome When you switch on your device for the first time, the Welcome application opens. Select from the following: • Tutorial provides information about your device and shows you how to use it. • Switch enables you to transfer content, such as contacts and calendar entries, from a compatible Nokia device. See "Transfer content between devices", p. 23. • Settings wizard helps you configure various settings.
If you are not able to use Settings wizard, visit the Nokia phone settings web site. Standby modes Your device has two different standby modes: active standby mode and standby mode. Active standby After you have switched on your device and it is ready for use, but you have not entered any characters or made other selections, the device is in the active standby mode.
The menu is a starting point from which you can open all applications in the device or on a memory card. The menu contains applications and folders, which are groups of similar applications. All applications you install in the device yourself are by default saved in the Installations folder. To open an application, scroll to it, and press the scroll key. To view the applications in a list, select Options > Change view > List view. To return to the grid view, select Options > Change view > Grid view.
To select different items, such as messages, files, or contacts, scroll to the item you want to select. Select Options > Mark/Unmark > Mark to select one item or Options > Mark/Unmark > Mark all to select all items. Tip: To select almost all items, first select Options > Mark/Unmark > Mark all, then select the items you do not want, and Options > Mark/Unmark > Unmark. To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side of the object.
Synchronise, retrieve, and send data If you have previously transferred data to your device with the Transfer application, select from the following icons in the Transfer main view: Synchronise data with a compatible device if the other device supports synchronisation. With synchronisation, you can keep the data up-to-date in both devices. Retrieve data from the other device to your new Eseries device. Send data from your new Eseries device to your other device.
Customise profiles Select Options > Personalise, and define the following: • Ringing tone — Select a ringing tone from the list, or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser. If you have two alternate phone lines in use, you can specify a ringing tone for each line. • Video call tone — Select a ringing tone for video calls.
3-D ringing tones Select Menu > Media > 3-D ringing tones. To enable three-dimensional sound effects for ringing tones, select 3-D ringing tone effects > On. Not all ringing tones support 3–D effects. To change the 3–D effect that is applied to the ringing tone, select Sound trajectory and the desired effect. To modify the 3–D effect, select from the following: • Trajectory speed — Select the speed at which sound moves from one direction to another. This setting is not available for all effects.
Leaving applications running in the background increases the demand on battery power and reduces the battery life. Contacts key To open the Contacts application, press the contacts key briefly. To create a new contact, press the contacts key for a few seconds. Calendar key To open the Calendar application, press the calendar key briefly. To create a new meeting entry, press the calendar key for a few seconds. E-mail key To open your default mailbox, press the e-mail key briefly.
you from storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation files to a compatible PC, then use the file manager to remove the installation files from the device memory. If the .sis file is a message attachment, delete the message from the Messaging inbox. The sales package of your device may not include a memory card. Memory cards are available as separate enhancements. 1.
To change the name of the memory card, select Options > Memory card name. You can protect a memory card with a password to prevent unauthorised access. To set a password, select Options > Set password. The password can be up to eight characters long and is case-sensitive. The password is stored in your device. You do not need to enter it again while you use the memory card in the same device. If you use the memory card in another device, you are asked for the password.
To insert a space, press 0. To move the cursor to the next line, press 0 three times. To switch between the different character cases, press #. Predictive text input 1. To activate predictive text input, press # twice quickly. This activates predictive text input for all editors in the is shown on the display. device. The indicator 2. To write the desired word, press 2-9. Press each key only once for one letter. 3.
Further information Instructions in your device To read instructions for the current view of the open application, select Options > Help. To browse the help topics and conduct searches, select Menu > Help > Help. You can select categories for which you want to see instructions. Select a category, such as Messaging, to see what instructions (help topics) are available. While you are reading the topic, scroll left or right to see the other topics in that category.
Business communications Your device provides you with efficient tools for voice communication and contact and time management. Telephone To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in the service area of a cellular network. To make or receive a net call, your device must be connected to a net call service.
scroll to the name, and press the call key. See "Contacts", p. 40. To make a call using the log, press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and press the call key. See "Log", p. 39. To adjust the volume of an active call, use the volume keys. To switch from a voice call to a video call, select Options > Switch to video call. The device ends the voice call and makes a video call to the recipient. Make a conference call 1.
To disable the sending of audio, video, or video and audio, select Options > Disable > Sending audio, Sending video, or Sending aud. & video. To use the loudspeaker for receiving audio, select Options > Activate loudspeaker. To mute the loudspeaker and use the earpiece, select Options > Activate handset. To swap the places of images, select Options > Change image order. To zoom the image on the display, select Options > Zoom in or Zoom out.
WLAN coverage, for example. The availability of the net call service may vary according to your country or area. Create a net call profile Before you can make net calls, you need to create a net call profile. 1. Select Menu > Tools > Settings > Connection > SIP settings > Options > New SIP profile, and enter the required information. To make the login to the net call service automatic, select Registration > Always on. Contact your net call provider for the correct settings. 2.
to the letter mode. Enter the address, and press the call key. To set net call as the preferred call type for outgoing calls, select Menu > Connectivity > Internet tel. > Options > Settings > Default call type > Internet call. When your device is connected to a net call service, all calls are made as net calls. Net call service settings Select Options > Settings, scroll to the settings of the desired service, and press the scroll key.
To divert calls to your voice mailbox, select a call type and a diverting option, then select Options > Activate > To voice mailbox. To divert calls to another phone number, select a call type and a diverting option, then select Options > Activate > To other number. Enter a number in the Number: field, or select Find to retrieve a number saved in Contacts. To check the current diverting status, scroll to the diverting option, and select Options > Check status.
3. Enter the DTMF tone sequence, or select a predefined sequence. Attach a DTMF tone sequence to a contact card 1. Select Menu > Contacts. Open a contact, and select Options > Edit > Options > Add detail > DTMF. 2. Enter the tone sequence. To insert a pause of about 2 seconds before or between DTMF tones, enter p. To set the device to send the DTMF tones only after you select Send DTMF during a call, enter w. 3. Select Done. Voice mail Select Menu > Tools > Call mailbox.
Make a call A voice tag for a contact is the name or nickname that is saved on the contact in Contacts. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. To listen to a voice tag, open a contact, and select Options > Play voice tag. 1. To make a call using a voice command, press and hold the voice key. 2. When you hear the tone or see the visual display, clearly speak the name saved on the contact.
Log stores information about the communication history of the device. The device registers missed and received calls only if the network supports these functions, the device is switched on and within the network service area. Call and data registers To view recently missed, received, and dialled calls, select Recent calls. Tip: To open Dialled numbers in the standby modes, press the call key. To view the approximate duration of calls to and from your device, select Call duration.
You can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact. You can also create contact groups, which allow you to send text or e-mail messages to many recipients at the same time. You can add received contact information (business cards) to Contacts. Contact information can only be sent to or received from compatible devices.
To change the display order of the first and last names of your contacts, select Options > Settings, and Last name First name, or First name Last name. Manage contact groups You can create a contact group so that you can send messages to several recipients at the same time. 1. Open the contact groups tab, and select Options > New group. 2. Enter a name for the group, and select OK. 3. Open the group, and select Options > Add members. 4.
To view the list of fixed dialling numbers, select Options > SIM contacts > Fixed dial contacts. This setting is only shown if supported by your SIM card. To restrict calls from your device to selected phone numbers, select Options > Activate fixed dialling. You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialling list, select Options > New SIM contact.
• Alarm — Set an alarm for meeting and anniversary entries. The alarm is displayed in the day view. • Repeat — Specify whether you want the entry to be repeated and when. Define the repeat type, frequency, and possible ending date. • Synchronisation — If you select Private, the calendar entry can be seen only by you and is not shown to others with online access to view the calendar. If you select Public, the calendar entry is shown to others who have access to view your calendar online.
Create a to-do entry 1. Scroll to a date, and select Options > New entry > To-do. 2. Enter the subject in the Subject field. 3. Enter the due date. 4. To set an alarm for the to-do entry, select Alarm > On. Enter the alarm time and date. 5. Specify a priority. The priority icons are ( ! ) High and ( - ) Low. There is no icon for Normal. 6. Define how the entry is handled during synchronisation in the Synchronisation field.
To mark a task as completed, select Options > Mark as done. To restore a task, select Options > Mark as not done. Calendar settings Select Options > Settings. To change the alarm tone, select Calendar alarm tone. To change the view displayed when you open the calendar, select Default view. To change the first day of the week, select Week starts on. To change the week view title, select Week view title and Week number or Week dates. Web 46 Select Menu > Web.
to open the link. On a web page, new links usually appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them. The addresses of the pages you visit are saved in the Auto. bookmarks folder. Bookmarks Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other thirdparty sites through your device.
Messaging 48 Select Menu > Messaging. In Messaging (network service), you can send and receive text messages, multimedia messages, audio messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in the service area of a cellular network.
Organise messages To end the reading, press the end key. To rename a folder, select Options > Rename folder. You can only rename folders that you have created. Select Menu > Tools > Speech. With Speech, you can set the language, voice, and voice properties for the message reader. To create a new folder to organise your messages, select My folders > Options > New folder. To move a message to another folder, select Options > Move to folder, the folder, and OK.
different vendor-specific e-mail solutions. Other e-mail providers may offer services with different settings or features than those described in this user guide. Contact your e-mail provider or service provider for more details. Before you can send, receive, retrieve, reply to, and forward e-mail on your device, you must also do the following: • Configure an internet access point. See "Internet access points", p. 94. • Set up an e-mail account, and define the e-mail settings correctly.
mail, you must first connect to the remote mailbox; then select the e-mail messages you wish to retrieve into your device. 1. To retrieve received e-mail messages to your device and view them, select your mailbox in the Messaging main view. When the device asks Connect to mailbox?, select Yes. 2. Enter your user name and password, if prompted. 3.
recipients, or the Bcc field to send a blind copy to recipients. 3. In the Subject field, enter the subject of the e-mail. 4. Enter your e-mail message in the text area, and select Options > Send. Delete messages To free up memory space on your device, regularly delete messages from the Inbox and Sent folders, and delete retrieved e-mail messages. To delete e-mail from the device only, and keep the original on the server, select Options > Delete > Phone (header remains).
Sending options for text messages To select a message centre to send the message, select Options > Sending options > Message centre in use. To have the network send you delivery reports on your messages (network service), select Options > Sending options > Receive report > Yes. To define how long the message centre resends your message (network service) if the first attempt fails, select Options > Sending options > Message validity.
3. Enter the text of your message. To use a template, select Options > Insert > Template. 4. Select Options > Send. Tip: To remove the picture from the message, select Options > Remove picture. Multimedia messages Select Menu > Messaging. Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. A multimedia message (MMS) can contain text and objects such as images, sound clips, or video clips.
Receive and reply to multimedia messages Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. Tip: If you receive multimedia messages that contain objects unsupported by your device, you cannot open them. Try to send these objects to another device such as a computer, and open them there. 1. To reply to a multimedia message, open the message, and select Options > Reply. 2.
View presentations To view a presentation, open the multimedia message from the Inbox folder. Scroll to the presentation, and press the scroll key. To pause the presentation, press either selection key. To resume playing the presentation, select Options > Continue. If the text or images are too large to fit on the display, select Options > Activate scrolling, and scroll to see the entire presentation. To find phone numbers and e-mail or web addresses in the presentation, select Options > Find.
Sending options for multimedia messages Select New message > Multimedia message > Options > Sending options and from the following options: • Receive report — Select Yes if you want to receive a notification when the message has been successfully delivered to the recipient. Receiving a delivery report of a multimedia message that has been sent to an email address may not be possible. • Message validity — Select how long the messaging centre tries to send the message.
For available topics and relevant topic numbers, contact your service provider. Cell broadcast messages cannot be received when the device is in the remote SIM mode. A packet data (GPRS) connection may prevent cell broadcast reception. Cell broadcast messages cannot be received in UMTS (3G) networks. To receive cell broadcast messages, you may need to set the cell broadcast reception on. Select Options > Settings > Reception > On. To view messages related to a topic, select the topic.
Select from the following: • Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image size. • MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that may not be supported by the network or the receiving device. To receive warnings about including such content, select Guided. To create a multimedia message with no restrictions on attachment type, select Free.
• My name — Enter a name to appear before your e-mail address when you send e-mail. • Reply-to — Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address to which you want to direct the replies. You can only enter one address to which replies are directed. • Delete e-mails from — Select whether you want to delete the e-mail messages only from the device or from both the device and the server.
To receive service messages from service providers, select Service messages > On. To select how to download services and service message content, select Options > Settings > Service message > Download messages > Automatically or Manually. If you select Automatically, you may still need to confirm some downloads since not all services can be downloaded automatically. • Memory in use — Select where to save your messages. You can save messages to the memory card only if a memory card is inserted.
Nokia Office Tools Nokia Office Tools support mobile business and enable effective communication with work teams. Active notes Select Menu > Office > Active notes. Active notes allows you to create, edit, and view different kinds of notes, for example, meeting memos, hobby notes, or shopping lists. You can insert images, videos, and sound in the notes. You can link notes to other applications, such as Contacts, and send notes to others. Create and edit notes To create a note, start writing.
Search Select Menu > Office > Search. With Search, you can search for information in your contacts, notes, calendar appointments, to-do notes, email messages, multimedia messages, and text messages. You can also search for files by the file names in your device memory and memory card. Search for information 1. Select the content types you want to search in. To remove the selection, select it again. To include all content types in your search, select Select all. 2.
Open the device tab or the memory card tab. To select multiple files, scroll to each file, and select Options > Mark/Unmark > Mark. To send the selected files, select Options > Send. To move or copy files or folders to another folder, select Options > Move to folder or Copy to folder. Default folders such as Sound clips in Gallery cannot be moved. To search for files, select Options > Find. Enter the search text, and press the scroll key.
To select an action, first select the team to which you want to apply the action, then scroll to the action bar, and select the desired action. If you do not want to apply the action to all team members, open the team, and select the desired members. Then select the action. To find more actions than are shown on the action bar, select Options > Actions. The following actions are available: • Call — Make a phone call to the team or selected team members.
To change the order of the action buttons, select an action, and Options > Move up, Move down, Move to top, or Move to bottom. Tip: If you select not to show all actions in the action bar, you can still access the actions by selecting Options > Actions. Converter Select Menu > Office > Converter. The converter has limited accuracy, and rounding errors may occur. Convert measurements 1. Scroll to the Type field, and select Options > Conversion type to open a list of measures.
You can store the archive files on the device memory or on a memory card. PDF reader Select Menu > Office > Adobe Reader. With PDF reader you can read PDF documents on the display of your device; search for text in the documents; modify settings, such as zoom level and page views; and send PDF files using e-mail. Printing You can print a message or file from the device, preview a print job, define page layout options, select a printer, or print to a file.
• • • • • • • • • Driver — Select a driver for the printer. Bearer — Select a bearer for the printer. Access point — Select the access point. Port — Select the port. Host — Define the host. User — Enter the user. Queue — Enter the print queue. Orientation — Select the orientation. Paper size — Select the paper size. Clock Select Menu > Office > Clock. In Clock, you can view your local time and time zone information, set and edit alarms, or modify date and time settings.
Notes Select Menu > Office > Notes. You can create and send notes to other compatible devices, and save received plain text files (.txt format) to Notes. Write and send notes To write a note, start entering the text. The note editor opens automatically. To open a note, scroll to it, and press the scroll key. To send a note to other compatible devices, select Options > Send. To synchronise or to define synchronisation settings for a note, select Options > Synchronisation.
Free time Your device contains a variety of media applications for both business and leisure time usage. Camera This section describes the camera in your E51-1 (RM-244) device. Select Menu > Media > Camera. Capture an image Your device supports an image capture resolution of up to 1600x1200 pixels. The image resolution in this guide may appear different. To capture an image, use the display as a viewfinder, aim at your subject, and press the scroll key.
4. To stop the recording, select Stop. The device saves the clip in the default folder, or in the folder you have defined. 5. If you do not want to keep the saved video clip, select Options > Delete. Select Back to return to the viewfinder to record another video clip. Select Options > Play to view the video clip in the RealPlayer application.
To rotate the image, select Options > Rotate. Select Right to rotate the image clockwise by 90 degrees, or select Left to rotate the image counterclockwise by 90 degrees. Manage image files To view detailed information about the image, select Options > View details. To send the image, select Options > Send, and the method for sending. To rename the image, select Options > Rename. To set the image as the display background, select Options > Use image > Set as wallpaper.
video to cover the maximum video area possible while the aspect ratio is maintained. Tip: To switch between the normal screen and full screen quickly, press 2 on the keypad. Send audio files and video clips To transfer a media clip to a compatible device, select Options > Send. Select the sending method. To send a media clip inside a message, create a multimedia message, select a clip to attach and Insert object > Video clip or Sound clip.
To play the music tracks repeatedly, select Options > Loop. Select All to repeat all the tracks in the current folder, One to repeat the selected track, or Off to set off the repeating. To add all music tracks from a specific subcategory to a new, saved, or the currently playing track list, select Options > Add to track list. After you have added or removed music files in the device, update your music library. Select Options > Update Music library.
You can also press the voice key to open the Recorder application. If you have logged in to push to talk, the voice key works as a push-to-talk key and does not open Recorder. Record a sound clip To record a sound clip, select Options > Record sound clip. Select Pause to pause the recording, and Record to resume recording. When you finish recording, select Stop. The sound clip is automatically saved to the Sound clips folder in Gallery.
your device automatically logs in, select Options > Settings > Server settings > Default server. To define how your device connects to the IM server, select Options > Settings > Server settings > IM login type. To establish a connection between your device and the default server automatically, select Automatic. To automate the connection only when in your home network, select Auto in home netw. To connect to the server when you open the IM application, select On app. start-up.
To add an IM user to the group, select Options > Add member. Select a user from your IM contacts or enter the contact ID. To remove a member from the IM group, select Options > Remove. To provide members with editing rights to the group, select Options > Add editor. Select a user from your IM contacts or enter the ID of the user. IM users with editing rights can edit group settings and invite other users to join the group or ban them from the group.
Flash player Select Menu > Media > Flash Player. With Flash player, you can view, play, and interact with flash files made for mobile devices. Manage flash files To optimise the use of Flash Player, insert a memory card in your device. To play a flash file, scroll to it, and press the scroll key. To send a flash file to compatible devices, select Options > Send. Copyright protection may prevent the sending of some flash files.
View visual content To check availability and costs, and to subscribe to the service, contact your service provider. Before you can view visual content, you must have an internet access point defined at Menu > Tools > Settings > Connection > Access points. 1. To view available visual content for a tuned station, select Options > Start visual service. If the visual radio service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).
PTT settings Select Options > Settings and select User settings to define your preferences for PTT, or Connection settings to change the connection details. Contact your service provider for the correct settings. Tip: You may also receive the settings in a message from the provider of the PTT service. Log in to PTT service If you have set Application start-up on in User settings, PTT automatically logs in to the service when started. If not, you must log in manually.
Create a PTT channel To create a channel, select Options > New channel > Create new. To register the channel to the PTT service, select Options > Register. To join a channel, select the channel you want to talk to, and press the voice key. To invite a user to a channel, select Options > Send invitation. To view the currently active users of a channel, select Options > Active members. To view more information about a selected user, select Options > Contact details.
If your device cannot find the satellite signal, consider the following: • If you are indoors, go outdoors to receive a better signal. • If you are outdoors, move to a more open space. • If the weather conditions are bad, the signal strength may be affected. • Establishing a GPS connection may take from a couple of seconds to several minutes.
amount of network traffic when you browse maps, create routes, or search for locations online. Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography provided for use in this device. To prevent the device from automatically downloading maps through the internet, for example, when you are outside your home cellular network, select Options > Settings > Network > Use network > Off.
Browse maps The map coverage varies by country. When you open the Maps application, Maps zooms in to the location that was saved from your last session. If no position was saved from the last session, the Maps application zooms in to the capital city of the country you are in based on the information the device receives from the cellular network. At the same time, the map of the location is downloaded, if it has not been downloaded during previous sessions.
2. Scroll to Select, and select Options > Select. To adjust the routing settings, such as the mode of transportation, select Options > Settings > Routing. 3. To select the destination, scroll to To, and select Options > Select. 4. To view the route itinerary, select Options > Show route. The route is calculated using the selected routing settings. To view the itinerary route on the map, select Options > Show on map. To run a simulation of the route, select Options > Start simulation.
Select Navigation to view navigating information to your trip destination, Position to view positioning information about your current location, or Trip dist. to view your travelling information such as the distance and duration you have travelled, and your average and maximum speeds. The application must receive positioning information from at least three satellites to be used as a travelling aid. The trip meter has limited accuracy, and rounding errors may occur.
• Select categories — Organise the landmark to a group of similar landmarks. Select a category to modify landmark information such as a name, category, address, latitude, longitude, and altitude. • Retrieve current position — Request and automatically fill in the geographical latitude and longitude coordinates to make a landmark of your current location. • Delete — Remove the landmark. • Landmark icon — Change the icon of the landmark. • Show on map — Show the landmark on the map.
Connectivity Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer. Fast downloading High-speed downlink packet access (HSDPA, also called ) is a network service in UMTS 3.5G, indicated by networks and provides high-speed data downloads.
To set the device to ask for the mode each time you connect the USB data cable to the device, select Ask on connection > Yes. Transfer data from a computer 1. Make sure that you have selected USB as a connection type in the Manage connections settings in Nokia PC Suite. 2. Insert a memory card to your device and connect the device to a compatible computer with the USB data cable. 3. When the device asks which mode is used, select Data transfer.
from obstructions such as walls or other electronic devices. Several Bluetooth connections can be active at a time. For example, if your device is connected to a headset, you can also transfer files to another compatible device at the same time. This device is compliant with Bluetooth Specification 2.
accept, the message is placed in the Inbox folder in the Messaging application. Tip: You can access the files in the device or on the memory card using a compatible accessory that supports the File Transfer Profile Client service (for example, a laptop computer). A Bluetooth connection is disconnected automatically after sending or receiving data. Only Nokia PC Suite and some enhancements such as headsets may maintain a connection even if not actively used. Pair devices Open the paired devices tab.
Security tips When you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden. Do not pair with an unknown device. SIM access profile With the SIM access profile, you can access the SIM card of your device from a compatible car kit device. This way, you do not need a separate SIM card to access SIM card data and connect to the GSM network.
Your device can detect and connect to a wireless local area network (WLAN). To use WLAN, a network must be available in the location and your device must be connected to it. WLAN connections Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorized access to your data. To use WLAN, you must create an internet access point in a WLAN.
To view the details of the WLAN, select Options > Details. To save the access point of the WLAN, select Options > Define access point. Always enable one of the available encryption methods to increase the security of your WLAN connection. Using encryption reduces the risk of unauthorised access to your data. Use the wizard in the active standby mode In the active standby mode, the WLAN wizard shows the status of your WLAN connections and network searches.
Set up an internet access point for packet data (GPRS) 1. Select Menu > Tools > Settings > Connection > Access points. 2. Select Options > New access point to create a new access point, or select an existing access point from the list and then Options > Duplicate access point to use the access point as a basis for the new one. 3. Define the following settings. • Connection name — Enter a descriptive name for the connection. • Data bearer — Select Packet data.
Set up an access point for WLAN manually 96 1. Select Menu > Tools > Settings > Connection > Access points. 2. Select Options > New access point to create a new access point, or select an existing access point from the list and then Options > Duplicate access point to use the access point as a basis for the new one. 3. Define the following settings. • Connection name — Enter a descriptive name for the connection. • Data bearer — Select Wireless LAN.
Together with a compatible computer, you can use your device as a modem to connect to the web, for example. Before you can use your device as a modem • You need an appropriate data communications software on your computer, such as Nokia PC Suite. For more information, see the Nokia PC Suite guide. • You must subscribe to the appropriate network services from your service provider or internet service provider. • You must have the appropriate drivers installed on your computer.
Security and data management Manage the data and software on your device, and take care of the security of the device and its contents. Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning. Lock the device Important: If the device has been locked, enter the lock code to activate the phone function.
To remove the memory card password, select Options > Remove password. When you remove the password, the data on the memory card is not protected against unauthorised use. To open a locked memory card, select Options > Unlock memory card. Enter the password. If you cannot recall the password to unlock a locked memory card, you may reformat the card, in which case the card is unlocked and password removed. Formatting a memory card destroys all data stored on the card.
View certificate details You can only be sure of the correct identity of a server when the signature and the validity period of a server certificate have been checked. To view certificate details, select View details. One of the following notes may appear: • Certificate not trusted — You have not set any application to use the certificate. You may want to change the trust settings. • Expired certificate — The period of validity has ended for the selected certificate.
You may not be able to change these codes for all security modules. The key store contains the contents of the security module. To delete the key store, select Key store, select the desired key store, and Options > Delete. You may not be able to delete the key store of all security modules. Back up data It is recommended to back up device memory regularly to the memory card or a compatible computer.
• Network authentication — Select whether to use http authentication. This setting is available only if you have selected internet as the bearer type. • Network user name — Enter your user ID for the http authentication. This setting is available only if you have selected internet as the bearer type. • Network password — Enter your password for the http authentication. This setting is available only if you have selected internet as the bearer type.
caused by software packages that are incompatible with each other. To remove software, select Options > Remove. If you remove software, you can only reinstall it by using the original software package file, or by restoring a full backup that contains the removed software package. If you remove a software package, you may no longer be able to open files created with that software. If another software package depends on the software package that you removed, the other software package may stop working.
• Ask every time — Require the Java application to ask for your confirmation each time it uses the functionality. • Ask first time — Require the Java application to ask for initial confirmation to use the functionality. • Always allowed — Allow the Java application to use the functionality without your confirmation. The security settings help protect your device against harmful Java applications that may use the functions of your device without your permission.
To activate a key, go to the Activation keys main view, and select Invalid keys > Options > Get activation key. Establish a network connection at the prompt, and you are directed to a web site where you can purchase rights to the media. To remove file rights, open the valid keys tab or the keys not in use tab, scroll to the desired file, and select Options > Delete. If there are several rights related to the same media file, all the rights are deleted.
Synchronisation connection settings 106 To define the connection settings of a new profile, select New sync profile > Connection settings and define the following settings: • Server version — Select the SyncML version you can use with the remote server. • Server ID — Enter the server ID of the remote server. This setting is only available if you select 1.2 as the SyncML version. • Data bearer — Select the data bearer to connect to the remote server during synchronisation.
To buy the selected item, select Options > Buy. A submenu opens, where you can select the version of the item and view price information. To download an item that is free of charge, select Options > Get. To view the details of the selected item, select Options > View details. To return to the Download! main level, select Options > Homepage. The available options may vary depending on your service provider, the selected item, and the view you are in.
Settings 108 Select Menu > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a special message by your service provider. You may not be able to change such settings. Select the setting you want to edit to do the following: • Switch between two values, such as on or off. • Select a value from a list.
Standby mode settings To select whether to use the active standby, select Standby mode > Active standby. To assign shortcuts for the scroll key and selection keys, select Standby mode > Shortcuts. These shortcuts are not available in the active standby. To assign shortcuts to applications, select Standby mode > Standby apps. To select whether to show or hide the operator logo, select Standby mode > Operator logo > On or Off.
To set the current date and time, select Date and Time. To define your time zone, select Time zone. To update the time, date, and time zone information automatically (network service), select Network operator time > Auto-update. To select whether to use the 12-hour or 24-hour clock system and with which symbol to separate hours and minutes, select Time format and Time separator. To determine the date format and separator, select Date format and Date separator.
To set a time-out after which the device is automatically locked and can be used only if the correct lock code is entered, select Phone and SIM card > Phone autolock period. Enter a number for the time-out in minutes, or select None to set off the autolock period. When the device is locked, you can still answer incoming calls, and calls may still be possible to the official emergency number programmed into your device. To set a new lock code, select Phone and SIM card > Lock code.
Network settings Select Menu > Tools > Settings > Phone > Network. To select the network mode, select Network mode and Dual mode, UMTS, or GSM. In the dual mode, the device switches automatically between networks. To select the operator, select Operator selection and Manual to choose from available networks, or Automatic to have the device select the network automatically. To set the device to indicate when it is used in Micro Cellular Network (MCN), select Cell info display > On.
in GSM and UMTS networks, it is possible to have multiple data connections active at the same time; access points can share a data connection, and data connections remain active, for example, during voice calls. See "Connection manager", p. 97.
In the access point settings, select WLAN security mode and the desired mode. WEP security settings Select WEP as the WLAN security mode. The wired equivalent privacy (WEP) encryption method encrypts data before it is transmitted. Access to the network is denied to users who do not have the required WEP keys. When the WEP security mode is in use, and your device receives a data packet not encrypted with the WEP keys, the data is discarded. In an ad-hoc network, all devices must use the same WEP key.
• WPA2 only mode — To allow both TKIP and AES (Advanced Encryption Standard) encryption, select Off. To allow AES only, select On Wireless LAN plugins Select Menu > Tools > Settings > Connection > Access points. The EAP (extensible authentication protocol) plug-ins are used in wireless networks to authenticate wireless devices and authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service).
• Default access point — Select the access point to use for the internet connection. • Public user name — Enter your user name received from your service provider. • Use compression — Select if compression is used. • Registration — Select the registration mode. • Use security — Select if security negotiation is used. • Proxy server — Enter the proxy server settings for this SIP profile. • Registrar server — Enter the registration server settings for this SIP profile.
To delete configurations for a trusted server, select Options > Delete. The configuration settings for other applications provided by this server are also deleted. Restrict packet data Select Menu > Tools > Settings > Connection > APN control. With the access point control service, you can restrict packet data connections from your device to certain access points only. Your SIM card may not support the access point control service. Contact your service provider for more information.
Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. General shortcuts General shortcuts Power key Call a phone number using speed dialling. You must first activate speed dialling at Menu > Tools > Settings > Phone > Call > Speed dialling > On. Web * Zoom in the page. 2 Open the search dialog. # Zoom out the page. Active standby mode 5 View the active pages. Left selection key Lock and unlock the keypad.
7 Zoom in. Press twice for the full screen size. 4 Scroll left in the zoomed image. 2 Scroll up in the zoomed image. 3 Rotate clockwise. * Switch between the full screen size and normal view. 6 Scroll right in the zoomed image. 8 Scroll down in the zoomed image. 1 Rotate counterclockwise.
Glossary Glossary 3G 3rd generation mobile communications. A digital system for mobile communications which aims at global use and provides increased bandwidth. 3G lets a mobile device user access a wide variety of services, such as multimedia. Ad-hoc operating mode A WLAN network mode where two or more devices connect to each other using WLAN directly without a WLAN access point.
GPRS General packet radio service. GPRS enables wireless access for mobile phones to data networks (network service). GPRS uses packet data technology where information is sent in short bursts of data over the mobile network. The benefit of sending data in packets is that the network is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection setup and fast data transmission speeds. You must subscribe to the GPRS service.
SIP Session initiation protocol. SIP is used for creating, modifying, and terminating certain types of communication sessions with one or more participants. SSID Streaming UMTS 122 USSD command Service set identifier. SSID is the name that identifies the specific WLAN. A service request, such as request to activate an application or configure various settings remotely, that you can send to your operator or service provider with your device.
Troubleshooting To see frequently asked questions about your device, visit the product support pages at the Nokia web site. Q: What is my lock, PIN, or PUK code? A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider. Q: How do I close an application that is not responding? A: Press and hold the home key.
Q: How do I switch WLAN off on my Nokia device? A: The WLAN on your Nokia device switches off when you are not trying to connect, not connected to another access point, or not scanning for available networks. To further reduce battery consumption, you can specify that your Nokia device does not scan, or scans less often, for available networks in the background. WLAN switches off in between background scans.
message > Multimedia retrieval > Manual to have the multimedia messaging centre save messages to be retrieved later, or Off to ignore all incoming multimedia messages. If you select Manual, you receive a notification when there is a new multimedia message that you can retrieve in the multimedia message centre. If you select Off, the device does not make any network connections related to multimedia messaging.
Battery information Charging and discharging 126 Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: Successful completion of the steps is not a total assurance of the authenticity of the battery.
Care and maintenance 128 Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste. Return the products to collection to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources. Collection information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment 130 This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
• Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity. an accident. Do not end the call until given permission to do so. Emergency calls CERTIFICATION INFORMATION (SAR) Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed.
network band. Additional SAR information may be provided under product information at www.nokia.com.
Index Symbols/Numerics 3-D ringing tones 26 802.
rejecting with text message 111 selecting type 111 settings 111 speed dialling 36 voice commands 39 voice dialling 39 voice mail 38 camera capturing images 70 recording video clips 70 settings 71 car kit remote SIM access 92 cell broadcast 57 settings 61 certificates details 100 settings 100 charging the battery 14 Clock alarms 68 settings 68 world clock 68 conference calls 33 configuration messages 116 connection methods Bluetooth 90 data cable 88 infrared 89 modem 96 connections ending 97 GPRS settings 95
free memory G 27 Gallery 71 GPRS access point settings 95 advanced access point settings 95 settings 112 H headset connecting 16 home key 26 HSDPA (high-speed downlink packet access) 88 I IM 136 application settings 77 blocking users 77 groups 76 settings 75 starting a conversation 76 images adding to contacts 72 display background 72 rotating 71 sending 72 zooming 71 indicators 17 infrared 89 inserting battery 13 memory card 28 SIM card 13 installation log 102 installing applications 102 internet
microSD 28 passwords 98 setting password 28, 63 unlocking 28 menu 21 message reader 49 selecting voice 49 messages 48 call rejection messages 111 cell broadcast settings 61 configuration messages 116 other settings 61 sending sound clips 56 service messages 57 text message settings 58 Messaging folders 48, 49 microSD 28 modem 96 multimedia messages attachments 56 creating 54 creating presentations 55 forwarding 56 receiving 55 replying to 55 sending 54 sending options 57 settings 58 multitasking 27 Music pl
Q creating a channel exiting 81 logging in 80 making a call 80 settings 80 Quickoffice R 138 81 64 radio listening to 78 saved stations 79 settings 79 viewing visual content 79 RealPlayer playing media clips 72 sending files 73 settings 73 viewing clip details 73 recorder playing recordings 75 recording a sound clip 75 settings 75 recording sound clips 75 video clips 70 remote configuration 101 remote lock 98 remote synchronisation 105 repair services 19 restoring original settings 111 ringing tones
text messages 58 time 109 tones 109 voice commands 39 Web 47 WEP security 114 WLAN 113 WLAN access point 96 WLAN security 113 Settings wizard 20 shortcuts 118 applications 109 keys 109 signal strength 17 SIM access profile 92 SIM card inserting 13 text messages 53 SIM change lock 110 SIM directory 42 SIP creating profiles 115 editing profiles 115 editing proxy servers 116 editing registration servers settings 115 sis files 102 sisx files 102 software packages installation settings 103 installing 102 softwar
changing number 38 voice over IP 36 VoIP 36 volume 26 W 140 wallpaper 72 warning tones 109 Web connection security 46 settings 47 weblogs 47 Welcome application 20 welcome note 108 WEP keys 114 security settings 114 wireless keyboard 69 WLAN 802.
