Installation Instructions
Table Of Contents
Installation
62 (72) © Nokia Corporation DN991456
Nokia Proprietary and Confidential Issue 3 en
Cabling an FXC E1/T1 transmission unit
• Connect the connectors of the TX/RX signal lines to the 100/120 Ω TX/RX
connectors on the FXC E1/T1 front panel (see Figure 22). Tighten the
connector nut properly.
8.4.4 FXC RRI transmission unit
Figure 23. Cabling of the FXC RRI transmission unit
Cabling the FXC RRI transmission unit
• Connect the RX/TX (Flexbus) cable from the radio outdoor unit to the
TNC connector(s) on the FXC RRI transmission unit (see Figure 23).
RX/TX
(Flexbus)
radio 2
RX/TX
(Flexbus)
radio 1
FXC RRI