Installation Instructions

Cabinet interfaces and cables
DN9913471 © Nokia Corporation Draft 37 (44)
Issue 3-0 en Nokia Proprietary and Confidential
Note
4 Cabinet interfaces and cables
This chapter describes the external interfaces and interconnecting cables
(excluding the grounding and power supply cables) for the Nokia MetroSite
EDGE Base Station. For information on the pin configurations of the relevant
connectors, refer to Nokia MetroSite EDGE Base Station: Product Description.
Antenna line cables, the LMP cable, Abis cables and Flexbus cables can be
ordered from Nokia.
The MetroSite BTS interface connectors and cables are described in Tables 7 and
8.
Table 7. MetroSite BTS connectors
Interface
connector
Number of
connectors
Connector
type
Cable type/diameter
Antenna
connector
1 for each TRX N-type 1/4” or 3/8” RF cable
External
Alarms and
Controls
1 (10 alarm
inputs, 4 control
outputs)
26-pin mini D
(female)
13-pair 28 AWG, 106 Ω
Flexible SCSI-2 Cable type
CL2/FT1
Extension
connectors
2 50-pin mini D
(female)
N/A
Q1 interface 1 TQ 2-pair telecom cable, max. 6
mm
Local
Management
Port
1 BQ, RS- 232 (at
the BTS end)
D9 female (at
the PC end)
2-pair telecom cable. For
more information, refer to
Nokia MetroSite EDGE Base
Station: Commissioning.