Installation Instructions
Table Of Contents
- Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Installation requirements
DN9913471 © Nokia Corporation Draft 35 (44)
Issue 3-0 en Nokia Proprietary and Confidential
Note
Note
8. Spray paint over the outside surface of the cover. Spraying should be done
at room temperature with relative air humidity of 50-65%.
The maximum thickness of the paint should not exceed 100 µm.
9. Dry the parts either in an oven or let the paint dry at room temperature
according to the paint manufacturer’s drying instructions.
The temperature of the drying oven must not exceed 90°C (194°F).
10. When the paint is dry, attach the cover top to the cover. Tighten the screws
to 1.6 Nm (1.18 lb ft).