Installation Instructions

Requirements for Installation and Operation
34 (44) © Nokia Corporation Draft DN9913471
Nokia Proprietary and Confidential Issue 3-0 en
3. Remove any stains and dust from the surface of the cover with an alcoholic
or acidic wash, or with water and a mild washing agent. Do not use washing
agents that contain alkalis, esters, ketones, or aromatic, chlorinated, or
fluorinated hydrocarbons.
4. Rinse with water to remove any residue of cleaning chemicals.
5. Dry the cover parts by blowing ionized air on them to remove electrostatic
charges and dust particles.
6. Place a support under the cover and the cover top so that you do not have
to touch the parts during painting.
7. Use a clamp or hook for holding the cable cover and the cable cover
support during painting. See Figure 7 for areas on which to place the clamp.
Figure 7. Areas used for holding the cable cover parts during painting