Installation Instructions
Table Of Contents
- Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Installation requirements
DN9913471 © Nokia Corporation Draft 33 (44)
Issue 3-0 en Nokia Proprietary and Confidential
Caution
Do not use any paints that contains alkalis, esters, ketones, or aromatic,
chlorinated, or fluorinated hydrocarbons. These chemicals may damage the cover
and paint containing them can only be used if approved by the manufacturer for
painting polycarbonate objects.
The selected paint must be UV and weather resistant, and suitable for
temperatures ranging from -40°C to +50°C (-40°F to 122°F). For environmental
conditions, refer to ETS 300 019-1-4:1992 class 4.1.
Painting the BTS cover
1. Remove the BTS cover as instructed in Nokia MetroSite EDGE Base
Station: Maintenance.
2. Before painting, detach the cable cover and remove the cable cover
support. The cover top can also be detached from the cover by unscrewing
the Torx T20 screws (see Figure 6).
Figure 6. Removing the top of the BTS cover