Installation Instructions
Table Of Contents
- Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Environment
DN9913471 © Nokia Corporation Draft 15 (44)
Issue 3-0 en Nokia Proprietary and Confidential
Caution
Note
Note
2.2 Transportation
This section defines the environmental conditions to which the Nokia MetroSite
EDGE Base Station can be exposed during transportation.
The Nokia MetroSite EDGE Base Station must be transported in its original
package to the installation site.
The Nokia MetroSite EDGE Base Station is delivered to the customer with the
ordered plug-in units pre-installed.
2.2.1 International standard for transportation
According to the standard ETS 300 019-1-2:1992, the class for the Nokia
MetroSite EDGE Base Station equipment is class 2.3. This class applies to
transportation situations where special care is taken, such as special care with
respect to handling in low temperatures.
The typical transportation time is considered to be 30 days or less. When the total
transportation time exceeds 30 days, additional storage or packaging precautions
must be considered.
2.2.2 Climatic conditions for transportation
The climatic conditions permitted during the transportation are presented in Table
2 (according to ETS 300 019-1-2:1992).