Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
68 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Figure 34. Cross-connections window in E1/T1 Manager
3. Click on the ‘Inactive bank’ tab to open the inactive bank page.
4. Click the ‘Connections’ ADD button to open the Add Cross-Connection
Wizard - TX1/RX1 dialogue box.
5. Select the desired interface by clicking the interface symbol.
6. Define the following settings according to your cross-connection plan:
• Label (the name of the new cross-connection, maximum 80
characters).
• Cross-connection type; in this case the type is ‘bi-directional’.
• Granularity (with nx64k, set also its coefficient n).
• Cross-connection class.
• Timeout.