Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Radio Wizard
DN999099 © Nokia Corporation Draft 63 (78)
Issue 4-0 en Nokia Proprietary and Confidential
Note
Figure 30. MetroHopper manual channel selection
Click NEXT to continue.
If the transmission unit type is FC RRI, there are no Flexbus 2 settings. Proceed
to Step 4.
3. If the transmission unit type is FXC RRI, define the Flexbus 2 settings for
the outdoor unit as described in Step 2.
4. The Summary of Commissioning Settings page displays the settings you
have defined for commissioning the radio(s).