Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Radio Wizard
DN999099 © Nokia Corporation Draft 59 (78)
Issue 4-0 en Nokia Proprietary and Confidential
Note
Note
8 Radio Wizard
When you click the RADIO HOP(S) button on the Radio Link Settings page in the
BTS Commissioning Wizard, the Radio Wizard is launched from the Nokia
MetroSite RRI Manager application. The Radio Wizard guides you through a
series of tasks for defining Flexbus and outdoor unit settings.
For more information on the commissioning and maintenance of radio units, see
the Nokia MetroHopper
TM
and FlexiHopper
TM
user manuals.
Commission radios as follows:
1. The Flexbus Settings page appears after you click the RADIO HOP(S)
button in the BTS Commissioning Wizard. The page displays the types of
indoor and outdoor units connected to each Flexbus.
Select the capacity for each outdoor unit from the ‘Capacity’ list and tick
the ‘In Use’ option for each Flexbus you want to use. At least one outdoor
unit must exist and be enabled (‘In Use’), before you can continue to the
next Wizard page.
With the Nokia MetroHopper outdoor unit, the capacity is fixed at 4 x 2 Mbit/s.
If the transmission unit type is FC RRI, the page displays only Flexbus 1 settings.
Click NEXT to continue.