Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
56 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Note
2. Click OK to accept the changes.
Figure 25. Synchronization settings with FXC E1/T1 unit
7.2.2 Synchronization settings for FXC RRI transmission units
There is no Synchronization dialogue box for the FC RRI unit, because the only
available timing option is Rx Clock.
Define RRI synchronization settings as follows:
1. Select the ‘Timing’ option for priority 1 as ‘Rx Clock’ and select the
interface number.
If necessary, define settings for the other priorities in the same way.
2. To see which timing source is currently active, click the REFRESH button.
3. Click OK to accept the changes.