Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
50 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
5. Click OK to return to the main Traffic Manager window. Figure 22 shows
the resulting traffic allocation for this example.
Figure 22. Example of the traffic allocation with EDAP for EDGE transmission
6. To complete the allocation, proceed to Section 6.1.4.
6.1.4 Completing the transmission allocations
Set the transmission allocation in the BTS as follows:
1. Check that the signal timing is correctly set (either ‘Normal’ or ‘Satellite’).
At this point you can click the EXPORT button to export the Abis time-slot
allocation information to a file for future maintenance purposes.