Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Traffic Manager
DN999099 © Nokia Corporation Draft 49 (78)
Issue 4-0 en Nokia Proprietary and Confidential
3. In EDAP Properties, select the available TRXs from the list and move
them to the ‘TRXs in this EDAP’ list by clicking on the <<< button. See
Figure .
Figure 20. Example of allocating EDGE TRXs for dynamic Abis
4. If the EDAP is to be shared with other BTSs in a cross-connection, select
the outgoing interface port in the ‘Outgoing interfaces for this EDAP’ box.
See Figure 21 for an example of this part of the EDAP Properties window
(this only appears if cross-connections are being used).
For more information on cross-connections, see Chapter 9 of this
document.
Figure 21. Selecting the interface for EDAP allocation in a cross-connected
BTS configuration