Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
44 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Figure 17. Example of a completed allocation in Traffic Manager
Alternative 2.
Click the TRXSIG on TCHs button and then click the first bit in a time-slot
you reserved for TCHs in Step 2. Select the link speed from the pop-up
menu. Repeat for all TRXs in the BTS configuration. Click the OMUSIG
button and then click a cell in the Abis allocation table. Select the link
speed from the pop-up menu.
Alternative 3.
Click the OMUSIG/TRXSIG1 button and then click the first bit in the
TCHs allocation for TRX 1. Select the link speed from the pop-up menu.
Click the TRXSIG or TRXSIG on TCHs button and allocate TRXSIG
capacity for the other TRXs in the BTS configuration.