Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
40 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Figure 14. ‘Waiting for system information’ symbol
15. Exit Nokia BTS Manager from FILE | EXIT on the main menu bar.
16. Disconnect the BTS Manager PC from the LMP port of the Nokia
MetroSite EDGE Base Station.
Refit the BTS cover, as described in the document, Nokia MetroSite EDGE
Base Station Installation.
The commissioning parameters are stored in the flash memory of the master TRX
(TRX 1). The master TRX creates backup copies of these parameters in the slave
TRXs’ flash memory.