Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning Wizard process
DN999099 © Nokia Corporation Draft 31 (78)
Issue 4-0 en Nokia Proprietary and Confidential
5. The Radio Links Settings wizard page appears if BTS Manager detects an
F(X)C RRI transmission unit in the BTS configuration (see Figure 6). If
there are no radios in the BTS configuration and this wizard page does not
appear, proceed directly to the next step in this procedure.
Click the RADIO HOP(S) button to launch the Radio Wizard (from the
radio transmission unit manager) and check or adjust the radio hop
parameters. The signal quality can also be checked when making these
adjustments in the Radio Wizard. Refer to Chapter 8 for instructions on
using the Radio Wizard.
When the radio links are ready, click NEXT to proceed.
Figure 6. Radio link settings in Nokia BTS Manager’s Commissioning Wizard
6. To allocate incoming Abis capacity to the BTS, click the TRAFFIC
MANAGER button in the Transmission Configuration window (see Figure
7) to open . For information on how to allocate the transmission capacity,
see Chapter 6.