Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning Wizard process
DN999099 © Nokia Corporation Draft 29 (78)
Issue 4-0 en Nokia Proprietary and Confidential
Figure 4. Opening window of BTS Manager’s Commissioning Wizard
4. Enter the parameters on the Set Transmission Parameters wizard page (see
Figure 5). All parameters on this page are optional. They appear in the
Commissioning Report, but the BTS does not compare them with the
corresponding parameters defined at the BSC.
Click LIF SETTINGS to check the line interface settings. Modify the
settings, if necessary, and click OK. See Chapter 7.1 for more information.