Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
28 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
5.2 Commissioning with Commissioning Wizard
To commission the BTS, follow the steps in the procedure below. You will be
asked to refer to other sections in this document for some operations in the
procedure, after which you should return to this main procedure.
Commissioning with Commissioning Wizard:
1. Start Nokia BTS Manager 3.0 on your laptop.
2. In BTS Manager, choose the COMMISSIONING | WIZARD command
from the main menu. The BTS Commissioning Wizard window appears.
3. Commissioning can only be done with a non-commissioned BTS. If the
BTS is already commissioned, select ‘Undo Commissioning’ and NEXT in
the BTS Commissioning Wizard window (this would be the only option
available in Commissioning Wizard). The BTS will be un-commissioned
and the ‘Manual Commissioning’ option will then appear in the BTS
Commissioning Wizard window.
To commission the BTS, select ‘Manual Commissioning’ in the BTS
Commissioning Wizard window and click NEXT (see Figure 4).