Product Info

Commissioning Wizard process
DN999099 © Nokia Corporation Draft 27 (78)
Issue 4-0 en Nokia Proprietary and Confidential
Note
5 Commissioning Wizard process
Commissioning is done with Nokia BTS Manager’s Commissioning Wizard.
It is assumed here that the site has been created at the BSC (LAPD links created
and PCM port active). If the site is newly created, the BCF is in the ‘locked’ state.
5.1 How to use Commissioning Wizard
Commissioning Wizard guides you through the commissioning process with a
series of wizard pages. Each wizard page contains data entry fields or paths to
dialogue boxes for data entry. When the settings on each wizard page are set up
according to your requirements, move to the next stage of the wizard with the
NEXT command, as described in the procedure in Section 5.2.
If you need to go back and change settings while in the wizard, click BACK. To
stop the commissioning without saving any of the settings, click CANCEL. Click
the HELP button on any wizard page to get a pop-up Help window.
When starting commissioning, the BCF object in the Supervision - Equipment
View window displays the ‘BCF is commissioning’ symbol (see Figure 3). You
can also check the operational state of the BCF by moving the mouse pointer over
the BCF symbol in the Supervision - Equipment View window, clicking the right
mouse button and selecting the BCF Properties command.
Figure 3. ‘BCF is commissioning’ symbol