Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
24 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Figure 2. Supervision - Equipment View window when two MetroSite EDGE
BTSs are chained as one BCF object
4.2.2 Defining Nokia BTS Manager options
If there is no connection to the BTS when starting Nokia BTS Manager, only the
BTS Events window is displayed and some BTS Manager menu options will not
be available. In this case, check the communication parameters. Check also that
the LMP cable is connected to the same COM port that is defined in BTS
Manager.
You can define the different BTS Manager options from FILE | OPTIONS.
4.3 Nokia BTS Manager Help
Nokia BTS Manager has a convenient, context-sensitive on-line Help facility for
getting information about a task you are going to perform, a feature you might
want to know more about, or a command you may want to use.
To get Help, do one of the following: