Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
22 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Note
4. Nokia BTS Manager starts with the Supervision - Equipment View (1), BTS
Events (2) and Alarms (3) windows opened (see Figure 1). The software
checks the BTS configuration and represents it graphically it in the Nokia
BTS Manager - Supervision window.
The Nokia BTS Manager PC must be connected to the BTS in order to make BTS
password checking possible. If no connection exists, password checking is not
applicable.
4.2.1 Nokia BTS Manager main windows
The main window of Nokia BTS Manager contains the main menu bar and three
sub-windows, Supervision - Equipment view, BTS Events and Alarms. The main
window and sub-windows are shown in Figure 1. If the sub-windows are not
displayed, see Section 4.2.2 of this document.