Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Getting started with BTS Manager
DN999099 © Nokia Corporation Draft 21 (78)
Issue 4-0 en Nokia Proprietary and Confidential
4 Getting started with BTS Manager
This chapter gives instructions on how to install, set up and obtain on-line help on
Nokia BTS Manager software. It is assumed that the user knows how to use the
Windows operating system.
When Nokia BTS Manager is installed and set up, the BTS is commissioned by
starting Commissioning Wizard, as described in Chapter 5 of this document.
4.1 Installing Nokia BTS Manager
Nokia BTS Manager is installed on a laptop PC which is connected to the BTS
via the LMP connector on the interface unit.
The installation program creates a Nokia BTS Manager icon on the Windows
desktop and defines the software’s parameters.
For more information on software installation and the system requirements of the
laptop PC, see the Nokia Site Wizard Software Release Binder or the instructions
on the CD-ROM sleeve.
4.2 Setting up Nokia BTS Manager
Start Nokia BTS Manager as follows:
1. Make sure that the BTS Manager laptop is connected to the LMP connector
on the interface unit of the BTS.
2. Double-click the BTS Manager icon on the desktop.
3. Enter the Nokia BTS Manager password. If the password checking option
has not been turned on and it is required, go to FILE | OPTIONS in Nokia
BTS Manager to set up a password (Windows 95/98 environment only).