Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
Commissioning
16 (78) © Nokia Corporation Draft DN999099
Nokia Proprietary and Confidential Issue 4-0 en
Note
2.1.1 Nokia BTS Manager 3.0
Nokia SiteWizard 3.0 contains Nokia BTS Manager version 3.0. This is used for
commissioning the BTS and for carrying out maintenance functions locally at the
BTS.
Nokia BTS Manager provides a graphical user interface to run in a laptop PC in
the Windows environment. See Figure 1 for an example of the graphical user
interface in Windows. The laptop is connected to the BTS via the local
management port (LMP) on the BTS interface unit.
Nokia BTS Manager uses a Commissioning Wizard to guide the user through the
BTS commissioning process. See Table 1 for a description of the Commissioning
Wizard features of Nokia BTS Manager version 3.0.
Nokia BTS Manager also provides a context-sensitive Help.
Hopper Manager 4.2.5
GCS 4.2 (Q1 stack) Service pack 1
SCF Editor 1.0
Included managers and
files
Version
Table 1. Main features of the Commissioning Wizard in Nokia BTS Manager,
version 3.0
Feature Description Reference
LIF and
Synchronisation
settings
For defining line interface and
synchronisation settings according to the
interface unit used.
Chapter 7
Traffic Manager For allocating Abis transmission capacity,
including EDGE dynamic Abis pool (EDAP)
and BTS chaining allocation.
Chapter 6