Product Info
Table Of Contents
- Commissioning
- 1 About this document
- 2 Commissioning software overview
- 3 Preparing for commissioning
- 4 Getting started with BTS Manager
- 5 Commissioning Wizard process
- 6 Traffic Manager
- 7 Line interface and synchronization settings
- 8 Radio Wizard
- 9 Cross-connections
- 10 Commissioning Report
- 11 Troubleshooting and fault reporting
- Appendix A. LMP connector description
About this document
DN999099 © Nokia Corporation Draft 13 (78)
Issue 4-0 en Nokia Proprietary and Confidential
Caution
1 About this document
This document describes the commissioning of the Nokia MetroSite
TM
EDGE
Base Station (BTS) for the 800, 900, 1800 and 1900 frequencies with BTS SW
version CX 3.2 and Nokia SiteWizard 3.0 with Nokia BTS Manager 3.0.
Commissioning is done with the Commissioning Wizard in Nokia BTS Manager.
The document provides instructions on how to use the Commissioning Wizard
and contains the following information:
• Nokia BTS commissioning software overview.
• Getting started with Nokia BTS Manager.
• The commissioning process with Commissioning Wizard, including:
- Defining line interface and synchronization settings.
- Allocating transmission capacity, including EDGE dynamic Abis
and BTS chaining.
• Configuring external radio units with Radio Wizard.
• Setting up cross-connections for expanded transmission topologies.
• Description of the Commissioning Report.
• Troubleshooting and fault reporting.
• Description of the LMP connector from the commissioning PC to the BTS.
Read carefully Nokia MetroSite EDGE Base Station: Warnings and Cautions
before starting BTS commissioning.
Commissioning tasks concerning any Nokia base transceiver station (BTS) may
be performed only by properly trained and authorised personnel.