Product Info
Table Of Contents
- Field Upgrade
- 1 Overview of field upgrade
- 2 Preparing for upgrade
- 3 Replacing the power supply unit
- 4 Replacing the cooling fan
- 5 Replacing or installing new TRX units
- 6 Chaining Nokia MetroSite EDGE BTSs
- 7 Commissioning for upgrade
- 8 Completing the upgrade
Preparing for upgrade
DN00187365 © Nokia Corporation Draft 15 (50)
Issue 2-0 en Nokia Proprietary and Confidential
2.3 Checking the upgrade deliveries
Check that the items delivered for the upgrade match the items required in your
upgrade/installation plan. Check the condition of the delivered items to confirm
that they are not damaged.
2.3.1 Parts required for a GSM/EDGE upgrade
Refer to Table 2 for details of the parts required for a GSM/EDGE upgrade.
2.3.2 Parts required for a BTS chaining upgrade
The following parts are required for a BTS chaining upgrade. The number of
items depends on whether there will be one or two slave cabinets in the chain.
Table 2. Parts required for a GSM/EDGE upgrade on the Nokia MetroSite
EDGE Base Station
Upgrade type Parts required
5W GSM to 5W GSM/EDGE upgrade • 5W GSM/EDGE TRX units
• Nokia SiteWizard with CX 3.0
software and Nokia BTS Manager
3.0 or later.
1W GSM to 5W GSM/EDGE upgrade • 5W GSM/EDGE TRX units
• Nokia SiteWizard with CX 3.0
software and Nokia BTS Manager
3.0 or later.
• HVSA, HVSB, HVSC, or HVSD type
power supply unit (see Chapter 3 for
specifications)
• HVMF type high capacity fan unit
• HVCU type BTS cover, for use with
high capacity fan