Product Info

Attachments
DN99252966 © Nokia Corporation Draft 63 (66)
Issue 3-0 en Nokia Proprietary and Confidential
Instructions:
1. Strip the power feeder cable from its main insulation 20 mm (0.787").
2. Strip the inner conductors and cut them so that the blue and brown wires
are 20 mm (0.787") long and the yellow/green wire is slightly longer, at 25
mm (1"). The stripped area is 4 mm (0.157") long.
3. Undo the screw holding the body parts together and store the screw, nut and
washer in a safe place. Separate the two parts of the body.
4. Remove the sleeve then feed the cable (exposed end) through the sleeve
from the rear.
5. Pull the cable through sufficiently to enable the wires to be attached to the
plug connectors.