Product Info

Attachments
DN99252966 © Nokia Corporation Draft 61 (66)
Issue 3-0 en Nokia Proprietary and Confidential
Note
6. Crimp the ferrule onto the body with the crimping tool CS77550.01. Use
the gap '4.52' on the tool.
7. Draw the shrinking sleeve over the ferrule and warm it to cause it to shrink
onto the ferrule.
Attachment 2: Installation configuration for the Abis 120-ohm interface of
Nokia MetroSite.
This cable is provided already assembled but is shown here to identify all the parts
constituting an Abis 120-ohm interface.
A TQ connector is fitted to both ends of the cable. The wires connecting the TQ
connectors are coloured as follows (see figure):
OUT+ (pin 4): White stripe
OUT- (pin 3): White
IN+ (pin 2): Blue stripe
IN- (pin 1): Blue