Product Info

Accessories and specifications
DN99252966 © Nokia Corporation Draft 37 (66)
Issue 3-0 en Nokia Proprietary and Confidential
Installing the multi-band indoor panel antenna
1. Fix the attachment plate to the wall using two 4 mm diameter screws. See
[1] in Figure 11.
2. Align the antenna over the attachment plate, keeping the cable in the
middle of the plate. See [2] in Figure 11.
3. Pull the antenna downwards until it clicks into place. See [3] in Figure 11.
Do not pull the antenna downwards with the antenna cable.
Figure 11. Installing the indoor multi-band panel antenna
2.4.6 Pole mounting clamps (50-115 mm pole diameter)
Product code: CS72196
This standard single unit clamp is suitable for standard Nokia antennas.
The number of clamps required depends upon the antenna.