User's Manual

Nokia MetroSite Base Station Commissioning
20 (34) © Nokia Telecommunications Oy Internal Copy NTC DN999099
Confidential Issue 1 en DRAFT 3 Draft
Note
Figure 8. BTS Commissioning Report
16. Quit the BTS Manager.
17. Disconnect the BTS Manager PC from the Nokia MetroSite BTS’s LMP
port.
The commissioning parameters are stored in the flash memory of the Master TRX
(i.e. TRX1). The Master TRX creates back-up copies of these parameters in the
slave TRXs’ flash memory.
For maintenance purposes, in the case of 1*TRX BTS, make a back-up copy of
the timeslot allocation settings using the Traffic Manager’s export function (refer
to 3.2).
At this point you should check the Alarms window for possible alarms generated
during the commissioning. For alarm descriptions, refer to Nokia MetroSite BTS
Alarm Descriptions.
Complete the installation as instructed in Nokia MetroSite Base Station
Installation.