User's Manual

• To set up Wi-Fi networks as you encounter them, open the connection manager and
click the Wi-Fi tab, then click the available networks text. Select the desired network
and click the “Connect” button. If required, input the security key and click “Connect”.
• To pre-set the Wi-Fi locations now, click “Profiles” and then “Add” and follow the steps to set up each Wi-Fi network.
Set up your Wi-Fi networks.You may pre-set your frequently used Wi-Fi locations now
or set them up later as you encounter them
3
-----------------------------------------------------------------------------------------------------------------------------------
do not insert your USB device until the installation is complete.
Follow the software installation steps on your screen
2
Unzipping CWMulfModePlus.slo
• Insert the unit into your laptop computer’s USB port. Windows XP: If setup does
not automatically start: click “Start” and choose “Run”. Type “D:\setup.exe”
(where D is the USB drive designation) and click “OK”.
• Windows Vista: If setup does not automatically start: click “Start” and choose
“Computer”, right click on “USB drive” or “CD drive” and choose “Open Auto
Play”. Select “Run Setup.exe”
Insert the USBw 200 into your laptop computer’s USB port
1