USBw 200 Series MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © 2009 Motorola, Inc.
Important Safety and Legal Information Important Product Safety and Regulatory Compliance Information RF Exposure Compliance and Guidelines Operating Instructions This section of your user manual provides important information about two different Motorola products. To determine which product you have, please review the label on the bottom of the product.
Important Safety and Legal Information Important Safety and Legal Information Copyrights and Trademarks equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Notice However, there is no guarantee that interference will not occur in a particular installation.
Important Safety and Legal Information Caring for the Environment Important Safety and Legal Information CMM Disclosure The following information is provided to enable regulatory compliance with the European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) when using Motorola Networks equipment in EU countries.
© 2009 Motorola, Inc. All other product or service names are the property of their respective owners. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Quick Start Guide USBw 200 Installation Procedure 1. Insert the USBw 200 into your laptop computer’s USB port. a. Windows XP: If setup does not automatically start: click “Start” and choose “Run”. Type “D:\setup.exe” (where D is the USB drive designation) and click “OK”. b.
1 Insert the USBw 200 into your laptop computer’s USB port • Insert the unit into your laptop computer’s USB port. Windows XP: If setup does not automatically start: click “Start” and choose “Run”. Type “D:\setup.exe” (where D is the USB drive designation) and click “OK”. • Windows Vista: If setup does not automatically start: click “Start” and choose “Computer”, right click on “USB drive” or “CD drive” and choose “Open Auto Play”. Select “Run Setup.exe” Unzipping CWMulfModePlus.
