User's Manual
Access P oint Hardw are Installation Customer Input/Output Cabling Installation
Customer Input/Output Cabling Installation
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Objective
This section contains the procedures for installing the Customer Defined Input/Output cables.
Cable Descriptions
Cable F as listed in T able 3 -1 is required for installation.
Customer Input and Output Connector Pinouts
This section contains the procedures for installing the Customer Defined Input/Output cables.
The CDI/CDO cables will be routed through one inch conduit to the access hole on the underside
of the B CU .
Figure 4 -16 Customer Dened Input and Output Connectors
ti-cdma-04185.eps
RGD
CUST. OUTPUT 1-2
CUST. OUTPUT 3-4
CUST. INPUT 5-8
CUST. INPUT 13-16
CUST. INPUT 1- 4
CUST. INPUT 9-12
Customer Dened Input/Output Cable Installation
F ollow the procedure in Procedure 4 -12 to install the Customer Defined Input/Output Cables
Continued
68P09277A59 -8 4 -33
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007