User's Manual
Access P oint Hardw are Installation Local GPS Cabling Installation
Figure 4 -13 Surge Arrestor Orientation and Ground Location
ti-cdma-05831.eps
RF -GPS Cable
To Antenna
Ground Cable
(Optional Connection)
Installing Local GPS Antenna and Cable
Figure 4 -14 shows the components of the Local GPS . The Local GPS is connected to the B CU
via the Customer Interface compartment.
Procedure 4 -10 Procedure for Installing Local GPS Antenna and Cabling
1
Determine the mounting location (see Local GPS Mounting Considerations,
T able 3-8 ).
2
Install the mounting kit at the Local GPS location of choice. Use the
appropriate mounting bolts for mounting surface.
Continued
68P09277A59 -8 4 -29
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007