User's Manual
Access P oint Hardw are Installation Base Control Unit Installation
Base Control Unit Installation
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Overview
This section contains procedures for installing a Base Control Unit (B CU). Refer to Figure 1 -1
for an overall view of the B CU .
BCU Compartments
Figure 4 -1 and Figure 4 -2 show the two major compartments that make up the B CU .
68P09277A59 -8 4 -5
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007