User's Manual

Div ersit y Access P oint (DAP) RF Head Assembly Installation Chapter 4: Access P oint Hardw are Installation
The following procedure is based on the RF Head arriving already assembled. If the
RF head must be assembled at the site then follow the procedure in Appendix A
Alternate RF Head Installation Procedure .
Figure 4 -18 RF Head Assembly
ti-cdma-05725.eps
Adjust Retention Brackets
slots upward to align with
side mounting bracket slots
Procedure 4 -13 Procedure to Install RF Head Assembly
Continued
4 -38 68P09277A59 -8
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007