User's Manual

MMI Cable F abrication Appendix C: MMI Cable F abrication
MMI Cable Fabrication
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Purpose
If the Motorola SLN2006A Man Machine Interface (MMI) Interface Kit is not available, cables
can be fabricated by the user to interface a nine -pin serial connector on an Line Maintenance
F acility (LMF) computer platform with an MMI connector . This section provides the information
necessary for fabricating these cables.
Required Parts
Table C -1 P arts R equired to F abricate MMI Cable
Item Part Number
Qty
Description
A
Motorola 3009786R01
1
Ribbon cable assembly , 1.524 M, one 8-contact MMI
connector , one 10-contact connector
B
AMP 749814-1, Belkin
A4B202B GC , or equivalent
1
Receptacle kit, unassembled, 9-position, socket
contacts, unshielded, metal or plastic shell, solder
or crimp-type contacts
Cable Details
Figure C -1 illustrates the details of the fabricated MMI cable.
C -2 68P09277A59 -8
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007