User's Manual

Access P oint Hardw are Installation Div ersit y Access P oint (DAP) RF Head Assembly Installation
Figure 4 -17 U -Bolt Sizing
ti-cdma-05727.eps
C
B
Table 4 -3 DAP U -Bolt Sizing
Nominal
Pipe Size
Pipe OD
Minimum Dimension
B
Maximum Dimension
B
Minimum
Dimension C
(in) (in) (mm) (in) (mm) (in) (mm) (in) (mm)
2 2.375 60.33 3.886 98.70 4.886 124.10 0.6 15
2.5 2.875 73.03 4.429 112.50 5.429 137.90 0.6 15
3 3.500 88.90 5.098 129.50 6.098 154.90 0.6 15
Dimension B maximum allowable increase is 1 inch (25.4 mm). This will result in a
corresponding increase in dimension C in order to maintain proper clamping force
RF Head Assembly Installation Procedure
F ollow the steps in Procedure A -1 to install the RF Head Assembly including main Support
Bracket Assembly .
68P09277A59 -8 4 -37
PRELIMINARY - UNDER DEVELOPMENT MA Y 2007