User's Manual

Access P oint Hardw are Installation Manual RF Head Installation Procedures
Figure A -3 RF Head Side Mounting Br ack ets and Solar Shield
ti-cdma-04195.eps
RF Head
Solar Shield
2X Side Brackets
Procedure A -3 Procedure to Install Optional RF Filter
1
From Procedure A-2 . If already attached to side mounting brackets, remove
RF Filter mounting bracket.
2
Secure RF Filter to filter mounting bracket using four screws. T orque screws
to 45 in-lbs (5 N-m).
3
Reattach RF Filter mounting bracket to RF Head side mounting brackets and
secure with two captive screws. T orque screws to 45 in-lbs (5 N-m).
4
A ttach four RF cables between the antenna and the RF Head.
See Figure A-4 .
Return to Procedure A-2 . step 9
68P09277A59 -8 A -9
MA Y 2007 PRELIMINARY - UNDER DEVELOPMENT