User's Manual

Access P oint Hardw are Installation T ools and Materials

Tools and Materials

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Introduction

Many of the tools and materials depend on the style of the wall or pole on which the mounting

bracket is being installed. The tools and materials required to install the BTS hardware are

speciﬁed for each mounting style. Due to the variability of mounting styles, additional tools and

materials may be required to meet speciﬁc site needs.

Tools and Materials

The tools and materials listed in T able 1 -2 are recommended to properly and safely perform the

various installation procedures. Not all the tools will be used in all the procedures.

Table 1 -2 T ools and Materials

Hand T ool Materials Purpose

Adjustable T orque ratchet

and metric/standard socket

set

Customer Supplied F or general torquing of bolts and nuts.

Cordless P ower Drill, 1/4-in

or 3/8-in drive

Appropriate wood and

masonry drill bits (Standard

set may be adequate)

Customer Supplied

Drill holes in wood and light concrete

Bucklestrap Cutting T ool (Motorola P/N 6604809N01) F or the pole mounting brackets

T ape Measure

Customer Supplied General purpose measurement

Tin Snips

Customer Supplied General purpose metal cutting

Safety Glasses Customer Supplied Eye Safety

Knife or Box Cutter Customer Supplied General purpose cutting

13/16 Breakaway T orque

W rench 38-in. lb

Customer Supplied

N Connectors

Block and T ackle Customer Supplied R aising the RF Head

No . 2 Blade Screw Driver Customer Supplied General Purpose

Electrical T ape Customer Supplied General Purpose

Adjustable Crescent W rench Customer Supplied General Purpose

T30 T orx Screw Driver

Customer Supplied General Purpose

Tie- W raps

Customer Supplied General Purpose, varying lengths.

Crimp T ool Customer Supplied Ground wires

68P09277A59 -8 1 -5

PRELIMINARY - UNDER DEVELOPMENT MA Y 2007