User's Manual

Access P oint Hardw are Installation R emote GPS Cable

Remote GPS Cable

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Objective

This section contains general information on the Remote Global P ositioning System (RGPS)

cabling. Installation information is found in Appendix B Alternate RGPS Installation , beginning

with Procedure B -1 .

Cable Label

Refer to T able 3 -1 for the labels used to identify the cables that will be shown in illustrations

throughout this chapter . Cable C is available in different kits covering several lengths.

RGPS Cables

T able 3 -6 provides the quantities and descriptions of the cables.

Table 3 -6 Cables Needed for RGPS Connections

Cable Qty

Part Number Description

C 1 T472AA

RGPS cable, 15 m (50 ft.)

T472AB

RGPS cable, 38 m (125 ft.)

T472AC

RGPS cable, 76 m (250 ft.)

T472AD

RGPS cable, 152 m (500 ft.)

T472AE

RGPS cable, 304 m (1000 ft.)

T472AF

RGPS cable, 608 m (2000 ft.)

1 SGKN4386

15 pin D -connector on one end and loose

wires on the other end. Cable is Motorola

P/N 3086433H12.

Mounting Considerations

The RGPS Head requires speciﬁc mounting considerations in order to properly observe the

GPS satellites.

68P09277A59 -8 3 -11

PRELIMINARY - UNDER DEVELOPMENT MA Y 2007