User's Manual

Access P oint Hardw are Installation Earth Ground and P ower Cables

Power Considerations

The Base Control Unit (B CU) is designed for 100/240 V AC @ 50/60 Hz, 16A max., +20 to +30

VDC , 78A max. or –60 to –39 VDC , 38A max.

The system conﬁguration determines which power cables are installed. The ground cable is

always installed ﬁrst. Based on the system conﬁguration perform the appropriate procedures

described in Chapter 4 Access P oint Hardware Installation .

DC Power (RF Head)

The DC power cable is orderable in a variety of lengths as indicated in T able 3 -3 below .

Depending on site conﬁguration all of one length or a combination of lengths (up to 4) may be

used.

Table 3 -3 RF Head DC P ower Cable Description and P art Numbers

Cable Qty

Part Number Description

G 1–4 3089298C01

P ower Cable, 20 m (65.6 ft)

1–4 3089298C02

P ower Cable, 40 m (131.2 ft)

1–4 3089298C03

P ower Cable, 60 m (196.8 ft)

1–4 3089298C04

P ower Cable, 80 m (262.4 ft)

1–4 3089298C05

P ower Cable, 100 m (328.0 ft)

68P09277A59 -8 3 -9

PRELIMINARY - UNDER DEVELOPMENT MA Y 2007