User's Manual

Ground Based Access P oint (GAP) Hardw are Installation Installation checklist
Table 7 -2 Checklist (Continued)
Item
no.
Item Notes
13
RF Head is grounded.
14
RGPS is cabled to B CU .
15
RGPS head and mast are secure.
16
RGPS connection is protected
by lightning arrestors (if
applicable).
17
RGPS head has a clear view of
the sky and is not in a location
which accumulates debris. Make
sure the RGPS is located away
from the transmit antennas.
18
Local GPS (RF GPS) antenna is
secure (if used).
19
Local GPS cabling is installed (if
used).
20
Installation hardware is
removed.
21
The site is cleaned, swept and
trash removed.
22
The site specific documentation
is present at the site.
23
This installation checklist is
present at the site.
68P09286A73 -1 7 -7
JUL 2007 PRELIMINARY - UNDER DEVELOPMENT