User's Manual

Ground Based Access P oint (GAP) Hardw are Installation Installation checklist
Installation checklist
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
This section provides a general list of items to be checked upon the completion of the site
installation.
Installation completion checklist
Fill in and check the items listed in the Installation completion checklist on page 7 - 5 , (below)
comprised of T able 7 -1 and T able 7 -2
Directions
If this manual is provided in electronic form, print out the following installation checklist. If a
paper copy is provided, you may want to make a copy before filling out the checklist so that it
is separate from this manual. Refer to the site manager . Fill out the installation completion
checklist and make any necessary copies. Make copies of this checklist as needed. The item
numbers listed in T able 7 -2 do not represent a specific order , they are supplied for convenience.
Installation completion checklist
Some of the follwoing site information may not be available, such as a model number . Include a
short description of the site information as specified by the site manager .
Table 7 -1 Site information
Site information
Item entry
Hardware installation completion
date:
Site: (name and description)
Serial number(s):
Model number(s):
Checklist completed by:
Checklist reviewed by:
68P09286A73 -1 7 -5
PRELIMINARY - UNDER DEVELOPMENT JUL 2007